1980 CHEVROLET IMPALA Recalls (3)
- Campaign:
- 80V132000 on 11/11/1980
- Component:
- Equipment:other:labels
- Manufactured:
- 07/31/1979 - 09/30/1979
- Affected:
- 85,158
- Defect:
- Vehicles may not conform to federal motor vehicle safety standard no. 110, "tire selection and rims". the tire rim size was omitted on the existing label.
- Correction:
- The owner has the option of affixing the correct information label him/herself or having the dealer do it at no charge to owner.
- Notes:
- Vehicle description: passenger vehicles.system: equipment; tire information labels.consequences of defect: lack of information could lead to the selection ofincorrect rims as replacement parts. this would create an unsafe situation thatcould result in an accident.
- Campaign:
- 80V135000 on 12/08/1980
- Component:
- Service brakes, hydraulic:foundation components:hoses, lines/piping, and fittings
- Manufactured:
- 07/31/1979 - 02/29/1980
- Affected:
- 24,719
- Defect:
- The involved vehicles may have insufficient clearance between the front brake pipe and the engine oil pan. this condition could cause the brake pipe to contact the left hand front edge of the oil pan, resulting in wear and, eventually, damage to the brake pipe. this could lead to a loss of brake fluid and subsequent loss of brakes.
- Correction:
- Dealer will replace the brake pipe, if necessary, free of charge.
- Notes:
- Vehicle description: passenger vehicles equipped with 3.8 liter cid v-6engines.system: service brakes; hydraulic lines, metallic.consequences of defect: loss of front braking at a time when minimum vehiclestopping distance is required could result in an accident.note: the driver may be alerted to brake fluid loss by illumination of thebrake warning light.
- Campaign:
- 83V077000 on 09/05/1983
- Component:
- Vehicle speed control:cables
- Manufactured:
- 09/30/1980 - 03/31/1983
- Affected:
- 19,108
- Defect:
- Accelerator pump lever retaining pin may loosen after repeated heavy accelerator pedal applications. this could cause the throttle to become stuck in the open position.
- Correction:
- Dealer will install a special cotter pin, to retain the accelerator pump pin, and a spring clip thrust washer on the accelerator pump link.
- Notes:
- Vehicle description: passenger vehicles equipped with closed loop quadrajetcarburetors and police car packages.system: power train; accelerator pump lever retaining pin.consequences of defect: vehicle speed would not decrease even after theaccelerator pedal is no longer depressed. loss of accelerator control withoutprior warning could result in an accident.note: if the failure occurs before corrective service can be performed, drivershould shift to neutral gear and apply brakes as necessary. vehicle should bepulled out of traffic and the ignition should be turned off after a completestop.
Home | Privacy