1993 AM-TRAN GENESIS Recalls (3)
- Campaign:
- 93V109000 on 07/11/1993
- Component:
- Equipment:other:labels
- Manufactured:
- 10/31/1992 - 04/30/1993
- Affected:
- 2,950
- Defect:
- The rear emergency exit door does not have an emergency exit label. consequently, the door does not conform to the requirements of fmvss 217, "bus window retention and release."
- Consequence:
- Passengers may not identify the door as an emergency exitin an emergency that requires the bus be vacated.
- Correction:
- Owners will be provided with an appropriate label and instructions for proper installation or am tran will provide assistance to owners.
- Notes:
- System: equipment; emergency exit label.vehicle description: school buses.
- Campaign:
- 94V195001 on 10/27/1994
- Component:
- Equipment:other:labels
- Manufactured:
- 10/31/1992 - 09/30/1994
- Affected:
- 566
- Defect:
- An incomplete tire size was listed on the certification label. also, the rim size listed on the certification label included only the width and not the width and diameter as required. these vehicles do not meet the requirements of fmvss no. 120, "tire selection and rims for motor vehicles other than passenger cars."
- Consequence:
- Consequence of non-compliance: incomlete certification labels can result in incoreect tires being mounted on the vehicle, and possible injury to persons attempting to mount incorrect tires.
- Correction:
- New certification labels will be sent to the owners of these buses.
- Notes:
- System: equipment; certification label; fmvss 120.vehicle description: school and transit buses built with tire sizes 265/75r 22.5, 295/75r 22.5, or 275/80r 22.5.note: if you own one of the vehicles described above and do not receive a new certification label, please call amtran at 1-800-843-5615. also, contact the national highway traffic safety administration's auto safety hotline at 1-800-424-9393.
- Campaign:
- 94V208000 on 11/01/1994
- Component:
- Suspension:multiple axle
- Manufactured:
- 10/31/1991 - 09/30/1994
- Affected:
- 3,421
- Defect:
- The rear axle bearing locking washer was not assembled with a tab bent over the jam nut. the jam nut can loosen allowing the bearing adjusting nut to loosen.
- Consequence:
- Bearing and axle damage can occur and the vehicle can become unstable, which can result in loss of steering control and an accident.
- Correction:
- Dealer will inspect the rear axle bearing lock nut assembly and check bearing adjustment. corrections will be made as necessary.
- Notes:
- System: suspension; single axle; rear; bearing wheel.vehicle description: school and transit buses.note: if the vehicle is presented to an authorized dealer on an agreed upon service date and the remedy is not provided free of charge within a reasonable time or the remedy does not correct the defect, please contact amtran at 1-800-843-5615. also, contact the national highway traffic safety administration's auto safety hotline at 1-800-424-9393.
Home | Privacy